PAGE 3 CAT

RAD100 --- RADIATOR --------- USED VERTICAL

RAD101 --- “ -------- CROSSFLOW 1275

RAD102 --- “ -------------EARLY 1500

IF YOU WANT THE ULTIMATE IN COOLING YOU WILL NEED ONE OF OUR ALUMINUM RADIATORS. WE DO TRY AND STOCK THE CROSSFLOW MODEL WHICH IS THE BEST TO USE.

ALR100 --- RADIATOR ---- ALUMINUM -- VERTICAL

ALR101 --- “ ---- “ – CROSSFLOW

TRD100 -- RAD. DRAIN TAP ----------- VERTICAL

RAC100 -- RADIATOR CAP -------------- “

RAC101 -- “ “ ------------ CROSSFLOW

RAC102 -- “ “ ----------------- 1500

RAC103 -- “ “ 23 PSI CROSSFLOW/ALUM.

RAC104 -- “ “ 19 TO 21 PSI “ “

THIS IS THE WINNER’S CIRCLE EASY MOTOR MOUNT. THIS NEAT UNIT IS JUST THE TICKET FOR R & R-ING AN ENGINE QUICKLY. THE IDEA IS TO REMOVE ONLY ONE BOLT AND PRESTO - NO FLATTENED MOUNT STUDS, IT ALSO SAVES TIME IN THAT YOU DO NOT HAVE TO REMOVE ONE OF THE ENGINE MOUNT TOWERS. ALL THAT IS NEEDED IS ONE UNIT BUT TWO WOULD MAKE THIS PART OF ENGINE R & R-ING A WHOLE LOT EASIER. THESE ARE SOLD ON AN EXCHANGE BASIS; WE NEED YOUR ORIGINAL UNIT THAT IS CLEAN AND NOT BENT.

EEM100 --------------------------- “A” SERIES

FMM100 - MOTOR MOUNTS --- FRONT -- “A” SERIES

FMM101 - “ “ BOTTOM REAR “ “

FMM103 - “ “ FRONT ------------ 1500

FMM104 - “ “ REAR ------------- “

WCR100 ----- WC ROD SET ----------- 948, 1098

WCR101 ----- ARP COMPETITION ROD SET --- 1275

WCR102 ----- WC ROD SET ---------------- 1500

WCG100 ----- WC GUDGEON PIN SET --------- 948

WCF100 ----- WC FLYWHEEL SET ------- 948,1098

WCF101 ----- WC “ “ ----------- 1275

WCF103 ----- ARP FLYWHEEL SET ------ 948,1098

WCF104 ----- “ “ “ ---------- 1275

WCN102 ----- CAMSHAFT NUT -------- “A” SERIES

CPB100 ----- CRANKSHAFT PULLEY NUT “ “

CPB101 ----- “ “ “ ----- 1500

IF YOU WANT TO MAKE IT A WHOLE LOT EASIER TO INSTALL AND REMOVE YOUR OIL PAN THIS WINNER’S CIRCLE OIL PAN STUD KIT IS THE ONE TO HAVE. IF YOU ARE USING ONE OF OUR COMPETITION OIL PANS THIS IS A MUST. KIT INCLUDES STUDS, WASHERS AND NUTS.

OPS100 ----- COMPLETE KIT -------- “A” SERIES

BRASS MANIFOLD NUTS THESE ARE SETS OF 6

WBM100 ----- SHORT --------------- “A” SERIES

WBM101 ----- LONG ---------------- “ “

MAIN BEARING BOLT SETS

WCM100 ----- COMPETITION ----------- 948,1275

WCM101 ----- “ ---- + 1” - “ “

WCM102 ----- “ -------- STD. - 1500

WCM103 ----- “ -----0-- + 1” - “

+ 1” BOLTS USED WITH MAIN BEARING STRAPS

MBS100 ---- ARP MAIN STUD KIT W/WASHER, NUTS ------------------------------------ 948,1275

ARP SUPER COMPETITION CHROME MOLY HEAD STUD KITS

THEY MIGHT BE PRICEY - BUT WELL WORTH IT. YOU WILL NOT FIND A BETTER STUD KIT ON THE MARKET FOR THE “A” SERIES MOTOR. THIS IS THE ULTIMATE KIT FOR LONGEVITY. YOU WILL BE ABLE TO INCREASE THE CLAMPING PRESSURE WHICH IN TURN HELPS SAVE HEAD GASKETS AND DNF’S. THE KIT INCLUDES 9 HEAD STUDS [11 FOR THE COOPER “S”] , 2 LONG AND 2 SHORT FOR THE ROCKER ARM AND APPROPRIATE WASHERS AND 12 POINT NUTS.

SCS100A ----- SET OF 9 ----------- “A” SERIES

SCS101A ----- SET OF 11 ---------------- 1275

STOCK ROCKER STUDS

RAS100 ----- SHORT --------------- “A” SERIES

RAS101 ----- LONG ---------------- “ “

RAS102 ----- SHORT --------------------- 1500

RAS103 ----- LONG ---------------------- “

THERMOSTAT STUDS

TST100 ----- VERT. ----- 948,1098, EARLY 1275

TST101 ----- CROSSFLOW ----------------- “

CSP100 - CRANKSHAFT PULLEY - STOCK - 948,1098

CSP101 - “ “ STOCK DAMPER - 1275

CSP102 CRANK PULLEY/WATER PUMP DRIVE KIT -------------------------------------- “A” SERIES

CSP103 “ “ “ “ “ “S” TYPE

PLT100 -- CRANK PULLEY LOCK TAB -- “A” SERIES

PLT101 -- “ “ “ “ -- FOR CSP102

CPS100 -- “ “ SHIMS ----- “A” SERIES

CDP100 -- “ DOWEL PINS/FLYWHEEL “ “

CSK100 -- “ KEY --------------- “ “

CSK101 -- “ “ --------------------- 1500

CLT102 -- FLYWHEEL LOCK TAB -------- 948,1098

CLT101 -- “ “ “ ------------ 1275

USD100 – GOOD USED CRANK - 948,1098,1275,1500

GIVE US A CALL AND WE WILL TELL YOU WHAT WE HAVE IN THE “GREY” ROOM.