PAGE 10 VALVE STUFF

INTAKE VALVES

INV100A ---- 1.094” -------------- 948 BUGEYE

INV100 ----- 1.160” ------------- 948 - 62-63

INV101 ----- 1.215” ---------------- 948,1098

INV102 ----- 1.312” ----------------  “   “

INV103 ----- 1.312” -------------------- 1275

INV104 ----- 1.402” “S” ----------------  “

INV105 --------------------------------- 1500           

EXHAUST VALVES

EXV100 ----- 1.000” ---------------- 948,1098

EXV101 ----- 1.040” - LATE KEEPER --  “   “

EXV101 ----- 1.060” -  “     “    --  “   “

EXV102 ----- 1.060” -  “     “    ------ 1275

EXV103 ----- 1.150” -  “     “    ------  “

EXV104 ----- 1.220” -  “     “    ------  “

EXV105 --------------------------------- 1500

VALVES WILL VARY IN SIZE UP TO +- .005 . WE WILL MEASURE FOR YOU, IF ASKED.

THE WINNER’S CIRCLE VALVE GUIDES ARE SILICON ALUMINUM BRONZE. THEY ARE THE ANSWER TO LESS GUIDE WEAR THAN CAST IRON. WITH THE ARRIVAL OF “NO  LEAD” GASOLINE, IT IS ADVANTAGES TO USE A GUIDE THAT WILL COMPENSATE FOR THE LACK OF LEAD AS A LUBRICANT. THIS IS THE GUIDE TO USE FOR COMPETITION ALSO.

ABG100 ----- SET OF 8 ------------ “A” SERIES

ABG101 -----  “  “  “ ------------------ 1500

VSS100 - VALVE STEM SEALS ”O” RING - 948,1098

VSS101 -   “     “    “   UMBRELLA “A” SERIES

VSC100 ----- VALVE KEEPERS --------- 948,1098  

VSC101 -----   “      “    ------------- 1275

VSC102 -----   “      “    ------------- 1500

ISKY SILICONE-CHROME VALVE SPRINGS ARE SHOT-PEENED AND TEMPERED FOR FATIGUE RESISTANCE, THEY ARE ALSO DOUBLE REVERSE WOUND. SETUP AT 1 5/16” INSTALLED HEIGHT. THE FOLLOWING ARE FOR THE “A” SERIES MOTORS AND 1500

ISS100 --- 100 LBS. - RATED 260 LBS. PER INCH 

ISS101 --- 115 LBS. - RATED 320 LBS. PER INCH

WHEN USING THE ISKY VALVE SPRINGS YOU MUST USE THE ISKY ALUMINUM RETAINERS. THE STOCK RETAINERS WILL NOT FIT THE LARGER DIA. SPRINGS.

VSR100 ----- ISKY SPRING RETAINERS “A” SERIES

SVS100 ----- STOCK VALVE SPRING SET  948,1098

SVS101 -----   “     “      “    “  ---- 1275

SVS102 -----   “     “      “    “  ---- 1500

ROCKER ARMS

HARLAND SHARP ROLLER ROCKERS HAVE PROVEN THEMSELVES TO BE VERY RELIABLE AND WELL MADE. THE ROCKERS ARE MADE FROM 2024-T3511 HARD ALLOY AIRCRAFT ALUMINUM EXTRUSIONS. THEY ARE HAND ASSEMBLED WITH PREMIUM BEARINGS, BUSHINGS ECT. IF YOU ARE PURCHASING A FULL KIT, THE WINNER’S CIRCLE INCLUDES COOPER ”S” ADJUSTERS AND NUTS, HARDENED THICK ROCKER SHAFT[NOT JUST A THICK WALL SOFT UNIT], STANDS AND SPACERS.

WHEN USING THE HARLAND SHARP 1.3475:1 ROCKERS YOU WILL INCREASE YOUR LIFT BY 7.2%. THEY ARE A DIRECT REPLACEMENT FOR THE STOCK ROCKERS. THESE ARE SOLD AS ROCKERS, WITH ADJUSTERS AND LOCK NUTS ONLY. I WOULD RECOMMEND USING OUR COMPETITION ROCKER SHAFT.

WCR100 ----- 1.3475:1 -------------- 948,1908

WCR101 -----    “     ------------------ 1275

WHEN USING THE 1.5:1 HARLAND SHARP ROLLER ROCKERS FOR COMPETITION YOU WILL HAVE TO DO A LITTLE FITTING BECAUSE OF THE INCREASED LIFT. MAKING SURE THE PUSHRODS CLEAR THE HEAD AND BLOCK. THESE KITS ARE SOLD COMPLETE WITH: ROCKERS, ADJUSTERS AND NUTS, HARDENED ROCKER SHAFT, CORRECT STANDS AND SPACERS.

WCR102 ----- 1.5:1 ----------------- 948,1098

WCR103 -----   “   --------------------- 1275

INDIVIDUAL ROCKERS ARE AVAILABLE, IF YOU SHOULD NEED ONE.

WCR100A ----- 1.3475:1 ------------- 948,1098

WCR101A -----    “     ----------------- 1275

WCR102A ----- 1.5:1 ---------------- 948,1098

WCR103A -----   “   -------------------- 1275

ADJ100 ------ ADJUSTER ----------- “A” SERIES

ADJ101 ------    “     NUT -------  “    “

THE HARLAND SHARP ROLLER ROCKERS  CARRY A LIFETIME GUARANTEE AGAINST MANUFACTURING DEFECTS BY CUSTOM SPEED PARTS MFG INC.

THE BEST PART IS THAT THEY ARE MADE IN THE U.S.A.

THE WINNER’S CIRCLE ALSO SELLS THE TITAN ROLLER ROCKERS. THIS KIT IS ALSO COMPLETE.  THESE ARE ALSO WELL MADE AND COME FROM ENGLAND.

TRR100 ----- SET ----- 1.5 ------------- 1275

TRR100A ---- EACH ---- 1.5 -------------  “

TRR100B ---- ADJUSTER ------------------  “

FRA100 - STOCK ROCKER ARM 1.25:1 - “A” SERIES

SRB100 -   “     “     “  BUSH ---  “    “ 

ORB100 - OFFSET ROCKER ARM BUSH KIT “    “

SRS100 ---- STOCK ROCKER SHAFT  --- “    “ 

THE WINNER’S CIRCLE HEAVY DUTY HARDENED ROCKER SHAFT HAS THE HOLD DOWN SCREW HOLE RE-LOCATED ON THE SECOND PEDESTAL TO ELIMINATE THE BREAKING OF THE SHAFT PROBLEM ENCOUNTERED AT HIGH RPM AND HIGHER SPRING PRESSURES.

SRS101 --------------------------- “A” SERIES

REPLACE YOUR SPRINGS ON THE ROCKER SHAFT, FOR LESS DRAG AND HEAT BUILT-UP, WITH THESE WINNER’S CIRCLE ALUMINUM SPACERS. SET OF 3.

ARS100 --------------------------- “A” SERIES

ARS101 ----- WASHERS ------- FOR ARS100 ABOVE