page 26 CAT. FRONT SHOCKS, BAR

als800 - new armstrong lever shock - rh - all

als801 -  “      “       “     “   - lh -  “

als800a  rebuilt “       “     “   - rh -  “

als801a    “     “       “     “   - lh -  “  

tfp800 ----- top fulcrum pin - shock arm   “

tfp801 -----  “     “     “  - nut ------  “

tfb800 -----  “  bushing - std. rubber --  “

srb800 ---- rebound buffer - under arm --  “ 

NOTE: FOR REBUILT FRONT SHOCKS SEE INSIDE BACK COVER FOR EXCHANGE TERMS.

this tube shock kit is a premium kit. your cars handling will be greatly improved over the use of the original “armstrong” shocks. no welding is needed as these kits are bolt on units. the kit comes complete with; “carrera” 50/50 SHOCKS with spherical rod ends [no rubber],  brackets, needed bolts/nuts and instructions.

tsk700 ----- street --------------------- all

tsk701 ----- race -----------------------  “ 

WSA600 - ALUMINUM WHEEL SPACERS - PAIR - 1/4”  

WSA601 -     “      “     “     -  “   - 3/8”    

WSA602 -     “      “     “     -  “   - 3/4”

WSA603 -     “      “     “     -  “   - 1”

WNE800 ----- WHEEL NUT ---------- PRE-ROSTYLE

WNE801 -----   “    “  ----- ROSTYLE – CHROME

the winner’s circle front sway bars are AVAILABLE in 3/4” and 7/8” diameters. the Ύ” is recommended for all street cars and for mild vintage racing. the 7/8” bar is for racing and should be used with a rear sway bar. these front bars mount the original locations. the chassis locating is by nylon bushings and the mounting to the “a” frame we use SPHERICAL rod ends. thus doing away with the original soft rubber. for street use the ride is not affected because the tires absorb the majority of the road shock. the kit comes complete with all NECESSARY bolts/nuts, bushings and instructions for an easy installation.

arb800 ----- 3/4” -------- street/RACE -- all

arb801 ----- 7/8 “ -------    “    “   --  “  

we do sell replacement items for the original factory front sway bars. the rubber bushings do wear out and the mounting straps do get bent by those nasty parking curbs.

rmb800 --- rubber bushing to chassis ---- all 

rms800 ---   “       “    “ mounting strap “

lrh800 --- end link ---------------- rh -- “

llh800 ---  “    “  ---------------- lh -- “

rlb800 --- sway bar locator ------ pair -- “

fbb800 --- “a” frame MOUNTING bracket ---- “

sbs800 --- sway bar - original ----------- “

WE HANDLE MAG WHEEL LUG NUTS WITH 11/16” DIA. SHANK. THEY CAN BE MACHINED DOWN TO YOUR DESIRED SHAFT SIZE. THESE NUTS COME WITH STEEL WASHERS.

MWN600 ----- 3/8” ------------ THREAD [STOCK]  

MWN601 ----- 7/17” -----------   “   OPTIONAL