PAGE 31 CAT. BRAKES

TILTON PEDAL ASSY.

FOR RACING YOU ARE GOING TO NEED A DUAL BRAKING SYSTEM. THE MEANING OF THIS IS, YOU NEED TWO INDEPENDENT MASTER CYLINDERS SO IF ONE END LOOSES PRESSURE, YOU STILL HAVE BRAKING ON THE OTHER. WE recommend THE TILTON pedal ASSEMBLY, WHICH HAS PROVISIONS FOR TWO BRAKE CYLINDERS AND ONE FOR THE CLUTCH. INCLUDED IS A balance BAR FOR ADJUSTING THE BRAKE BIAS FRONT TO REAR. THIS ASSEMBLY IS CONSTRUCTED OF ALUMINUM AND HAS THE CORRECT PEDAL length. SOME FABRICATION IS NEEDED FOR INSTALLING INTO THE MIDGET.

TPA900 - PEDAL ASSEMBLY ----------------- ALL

TBC900 - TILTON MASTER CYLINDER 5/8” BORE  “

TBC901 -   “      “       “     3/4" BORE  “

TBC902 -   “      “       “     7/8” BORE  “

TBC903 -   “      “       “     1”    “    “

TBK900  REBUILD KITS AVAILABLE FOR ABOVE, STATE SIZE NEEDED.

tbc904 – tilton proportioning valve – w/lever 

the above valve is recommended for use in racing to cut back the rear wheel braking. to much rear brake will surly make you spin when appling the brakes hard. a must when using rear disc brakes. mount on tunnel for easy adjusting with lever.

tbc905 – tilton adjusting cable --- with knob

DEP900 ----- TOP PEDAL BOX SEAL ---- 948,1098

PBS902 ----- PEDAL BOX TO BODY SEAL   “   “  

FEC901 -----   “   CLEVIS [FORK] ---  “   “  

FEC901 -----   “      “    PIN -----  “   “

PRS900 ----- PEDAL RETURN SPRING ---  “   “

PBS900 -----   “   BOX SEAL “H” --- 1275,1500

PBS901 -----   “   BOX TOP/BOT SEAL   “   “  

BPP900 - PEDAL PAD - BRAKE AND CLUTCH “   “  

twv900 ----- brass unions ------------  2 way

twv901 -----   “     “    ------------  3 way

twv902 -----   “     “    ------------  4 way

wbb900 ----- copper washers ----------- small

wbb901 -----    “      “    ----------- large

prs901 ----- PEDAL RETURN SPRING -- 1275,1500

bls300 --- brake switch in brake line - SPADE

bls300a --   “      “    “   “    “   - screw  

bls301 ---   “      “   on pedals - 1275,1500

BMC900 MASTER CYLINDER NEW - 7/8” DRUM BRAKES

BMK900   “       “    REBUILD KIT - FOR ABOVE

BMC901   “       “    NEW -- 3/4” DISC bRAKES

BMK901   “       “    REBUILD KIT - FOR ABOVE

BMC902   “       “    NEW DISC  ALL 1275,1500

BMK902   “       “    REBUILD KIT - FOR ABOVE

BMC903   “       “    NEW --- FOR 1967 SINGLE

TGC900 ----- TOP GASKET --- FOR BMC900,BMC901

SGC900 ----- END    “   ---  “     “      “

MCP901 -- MASTER CYLINDER PUSH ROD - 948,1098

BMC904 --    “      “   PLASTIC CAP   “   “ 

BMC905 --    “      “      “    “  FOR BMC902